Skip navigation

There’s just something about an IBM machine. After the PS/1 and PS/2 line IBM continued within the consumer PC market with a line simply known as the IBM PC line. This line of PC’s was sold roughly from 1994 to 2000 and consisted of many models from mid range 486 CPU’s to Pentium III’s. There isn’t anything particularly special about the IBM PC line as they don’t do anything necessarily new outside of a few uncommon design choices though I have to say I’ve always loved the look of the desktop cases within the line. In this article we are going to look at the 300PL type 6562…..sounds like a designation for a WWII Japanese tank.

ibm300pl1

I’ve just always liked the look of these desktops. Kind of unique look that mixes more modern style (late 90’s and 200’s) with older (80’s early 90’s). The only thing I really don’t care for is the plastic case seems pretty fragile in parts and mine received a fair amount of damage in shipping. We have sort of a “ribbed” beige case with a nice prominent IBM logo. To the left we have a large round power button as well as your led lights for power, HDD and Ethernet. Not to much room for external bays as we have a spot for a 1.44mb floppy mid case and to the right of it two 5 1/4 bays that I currently have a DVD drive installed in one and nothing in the lower bay. Stock this machine would have a CD drive installed rather then a DVD drive.

One feature of the type 6562 that is lacking on most other models of the 300PL line is the convenient front audio options.

ibm300pl2

We have a microphone jack and a headphone jack as well as a very convenient volume knob. My research indicates this was removed from later models due to the fact it was difficult to line up the case with the volume knob when putting the case top back in place though personally I have not found this to difficult. The built in audio is powered by a Crystal 4236B chip. It is possible to enhance the audio quality of the sound by replacing some caps but I will leave a link outlining this processed at the end of the article.

Looking at the back.

??????????????

You may notice in the image above that the case uses plastic tabs to shut which unfortunately were damaged in shipping so the case doesn’t quite snap back together properly. There are four expansion slots arranged in a vertical manner as well as a key slot for locking the machine if you were the type to do such things. Its inclusion does make sense seeing as these were likely heavily marketed to business. Starting at the lower left we have the usual suspects, audio in and out jacks along with built in Ethernet port, parallel port, two USB ports, two serial ports, ps/2 ports for keyboard and mouse and finally a built in VGA port. Having built in Ethernet and audio out of the box is a nice feature for a Pentium 1 machine.

The IBM 300PL uses a screwless case design which causes it to suffer similarly to others 90’s screwless cases. The plastic has become brittle with age and is easy to accidentally snap off making shipping and even routine case open and closings a risky endeavor.

ibm300pl4

Above are the internals along with a view of where the drives are oriented. One interesting thing about this motherboard that you can’t see to well in this image is that floppy, IDE and power connectors are all located on the riser card rather then the motherboard itself.

ibm300pl6

With the removal of two screws the 5 1/4 bays can fold up on a hing allowing easy access and revealing a bay on the underside for a hard drive. I like this feature as it makes swapping drives very easy.

The primary IDE connector is actually located on the side of the riser card facing 5 1/4 bays. The primary power connector is also located on this side which can be made out in the background.

ibm300pl7Now to take a look at the riser card itself.

ibm300pl8

Here you can see the secondary IDE connector as well as the floppy connector and power connector for the floppy drive, which is somewhat odd seeing as power is not being supplied by a cable straight off the power supply. This riser card has three PCI and two 16-bit ISA slots though one of the PCI/ISA slots is shared. This is more then adequate for a late DOS or early windows rig in my opinion

ibm300pl9

??????????????

1) CPU – The 300PL is an early socket 7 motherboard with the Triton II chipset which seems to have been a high-end offering at the time. My 300PL came with a Intel Pentium 200mhz installed but I upgraded it to a 233mhz MMX CPU which is officially the fastest CPU it can take. Upgrading the CPU is possible though with something like a PowerLeap PL-K6-III. The stock CPU does not come with a fan on the heatsink but the case fan is located directly below the CPU blowing air over the heatsink.

The 300PL has 512kb of on-board L2 cache which I suspect are the two chips located just above the CPU

2) The 300PL is very picky about RAM. According to official documentation it must be EDO nonparity (NP) or EDO error correcting code (ECC) DRAMs of up to 128mb in size. Mine currently has 128MB that came installed when I acquired this machine. The max RAM that is physically possible to install is 384mb since there are only three sockets for RAM and the machine is only capable of using 128MB sticks each. The chipset itself though is capable of supporting 512mb of RAM. I attempted to use various RAM sticks over 128mb and none were accepted.

??????????????

3) Video – The built in video chip is actually rather good and is the Matrox Mystique 1064SG-H chip. Not a surprising choice seeing as this machine has business uses in mind but it still makes a fast chip for DOS games and offers excellent 2d image quality as well as providing some early 3D abilities. The Mystique does have some compatibility issues with things like fog layers in some games but overall is a good chip, especially when paired with something like a Voodoo 1 or 2. The chip comes with 2mb of video SGRAM built into the board with the option to increase the amount to 4mb with an add on card. There is also connections for video option cards like the Rainbow Runner.

ibm300pl11

That white connector to the right is for an optional IR upgrade.

4) Switch block – Rather then use all jumpers to make settings IBM opted to use a nice switch block to help set things such as CPU speed. Here is a shot of the info sheet on what the switches control located on the underside of my case.

ibm300pl10

ibm300pl13(double click to enlarge)

5) CMOS Battery – Next to the switch block is also located the CMOS battery for saving changes made in the BIOS.

That’s about it for the IBM 300PL type 6562. It’s actually not a bad choice for a DOS machine or early Windows. The amount of options built in is nice and the the built in video is actually very good for the time especially when paired with a Voodoo card. The case, although very estheticly pleasing, at least to me, suffers from aging brittle plastic issues as do most screwless 90’s computers.

A great resource on the 300PL 6562 HERE

Benchmarks (Intel 233mhz MMX, 512kn L2 cache, 128 EDO RAM, Built-in Matrox Mystique 1064SG-H)

3D Bench – 163.6

PCP Bench – 58.1

DOOM – 82.7

Quake – 45.6

Speedsys – 175.43

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

I ❤ Old Games!

Retrogaming & other stuff

Waltorious Writes About Games

Game-related ramblings.

NekoJonez's Gaming Blog

A Journey Through A Gamer's Life

Old School Game Blog

Amiga enthusiasm, retro gaming passion

Evelynn Star

Lynn talks about video games, records and books ...

Retro Megabit

Sharing My Retro Video Game Collection.

133MHz's Junk Box

Random electronics and gaming crap

SNES A Day

Every game, every day

Too Many Games

A blog talking about games

Retrocosm's Vintage Computing, Tech & Scale RC Blog

Random mutterings on retro computing, old technology, some new, plus radio controlled scale modelling.

The PewPew Diaries.

Work(s) in Progress!

The Martian Oddity

Video Games and other weird stuff!

1001Up

1001 video games and beyond

retro computing and gaming plus a little more

sparcie

retro computers and stuff

jispylicious

Stay Jispy!

lazygamereviews

MS-DOS game reviews, retro ramblings and more...

%d bloggers like this: